Sugar, flour, starch, activated carbon, polymers, many chemical intermediates — a large proportion of the powders handled in industry can burn, and when finely dispersed in air, can explode. Dust explosions are rare, but their consequences are severe, and they are among the most underestimated risks in bulk handling.
Understanding Dust Explosibility
As French bulk-handling specialist Transitube points out, fine dust suspended in air can become highly flammable on contact with an ignition source. Citing INERIS, the French national institute for industrial environment and risks, Transitube notes that around 70% of industrial dusts have explosive potential.
A dust explosion requires five conditions to be met at the same time — often described as the "explosion pentagon":
- a combustible dust (the fuel);
- oxygen, usually from the air;
- an ignition source;
- dispersion of the dust in air at a concentration within its explosive range;
- confinement — a vessel, silo, duct or room in which pressure can build up.
Removing any one of these conditions prevents the explosion. Prevention strategies are therefore built around controlling each element in turn.
Laboratory tests characterise how a given dust behaves: its explosion severity (often expressed by the KSt value and maximum explosion pressure), its minimum ignition energy and its minimum ignition temperatures. These parameters, specific to each product, drive the design of protective measures.
Key Risk Factors
Transitube's analysis highlights several recurring factors:
- Transfer phases. Moments when product is set in motion — filling, emptying, conveying — are among the most critical, because they generate dust clouds.
- Ignition sources. Sparks, friction, mechanical heating and static electricity are all potential triggers.
- Installation design. A poorly designed installation, or one lacking appropriate protection, can turn a routine powder transfer into a serious accident.
- Human factors. Training, vigilance, feedback from the field, incident management and team culture are as important as the equipment itself.
Housekeeping is a further, often overlooked, factor: dust deposits on floors, beams and equipment can be lifted by a small primary event and fuel a much larger secondary explosion.
ATEX Classifications Explained
In Europe, explosive atmospheres are governed by two ATEX directives: one covering the protection of workers (1999/92/EC), which requires areas to be classified into zones, and one covering equipment intended for use in those zones (2014/34/EU). For combustible dusts, three zones are defined:
- Zone 20 — an explosive dust atmosphere is present continuously, for long periods or frequently (typically inside silos, hoppers and conveyors).
- Zone 21 — an explosive dust atmosphere is likely to occur occasionally in normal operation (for example around filling and emptying points).
- Zone 22 — an explosive dust atmosphere is unlikely in normal operation and, if it occurs, persists only for a short period.
Equipment installed in each zone must be certified for the corresponding category (1D, 2D or 3D). Transitube refers in particular to the use of ATEX-certified equipment in zones 21 and 22.
In the Gulf, many industrial facilities — particularly those operated by international groups or built to international specifications — apply ATEX or the closely related IECEx framework, alongside national civil defence requirements. Food, chemical, pharmaceutical and water treatment plants handling combustible powders all fall within scope.
Safe Transfer Solutions
Because transfer phases are critical, the choice of conveying technology has a direct impact on risk:
- Enclosed systems keep the product inside a sealed path, limiting dust emissions to the surrounding area and the build-up of deposits.
- Earthing and bonding of all conductive parts prevents the accumulation of static charges.
- Dust extraction at loading and discharge points reduces the extent of hazardous zones.
- Protective measures such as venting, suppression or isolation are designed for vessels where an explosive atmosphere cannot be excluded, based on the dust's tested properties.
Transitube's Approach to ATEX-Compliant Systems
Transitube specialises in the handling of powders and granules, with French-manufactured equipment adapted to hazardous environments. Its flexible screw conveyors move product inside a closed tube, which keeps the material contained along the entire transfer path and helps limit dust release at the source. ATEX-certified configurations are available for installations where explosive atmospheres are present.
Equipment alone does not make an installation safe: zoning, a documented risk assessment, maintenance and operator training remain essential. As Soditech's partner, Transitube can support project teams in the region in selecting a transfer configuration consistent with the classified zones of their plant.
Sources: Transitube, "Explosion de poussières industrielles" (transitube.com); INERIS; Directives 1999/92/EC and 2014/34/EU. This article is for general information and does not replace a site-specific risk assessment.
Résumé en français — l'article complet est disponible en anglais (bouton EN).
Selon l'INERIS, cité par Transitube, environ 70 % des poussières industrielles présentent un potentiel explosif. Une poussière fine en suspension peut devenir hautement inflammable au contact d'une source d'ignition.
Les conditions d'une explosion
Le « pentagone de l'explosion » réunit un combustible, l'oxygène, une source d'ignition, la mise en suspension et le confinement. Supprimer un seul de ces éléments suffit à prévenir l'explosion.
Les facteurs de risque
Les phases de transfert — remplissage, vidange, convoyage — sont parmi les plus critiques. Étincelles, frottements, échauffements mécaniques et électricité statique sont autant de sources d'ignition. Une installation mal conçue ou sans protections adaptées peut transformer un simple transport de poudre en accident grave ; la formation et la culture d'équipe jouent un rôle déterminant.
Zonage ATEX et solutions
Les zones 20, 21 et 22 définissent la fréquence de présence d'une atmosphère explosive ; les équipements doivent être certifiés pour la catégorie correspondante. Dans le Golfe, de nombreux sites appliquent ATEX ou IECEx. Les convoyeurs à vis flexible de Transitube transportent le produit dans un tube fermé, limitant les émissions de poussières, avec des versions certifiées ATEX. Soditech accompagne les projets de la région dans le choix d'une configuration adaptée.