Truck parked in front of stacked shipping containers
Equipment Équipements

Mobile Dewatering Units: Flexibility for Temporary or Emergency Sludge Treatment

Unités mobiles de déshydratation : flexibilité pour le traitement temporaire des boues

Published · 3 min read

Publié le · 3 min de lecture

Not every sludge problem justifies a permanent dewatering building. Plant upgrades, lagoon clean-outs, process failures and pilot trials all create a temporary need for dewatering capacity — often at short notice. Mobile filter-press units are designed precisely for these situations.

What Are Mobile Dewatering Units?

A mobile dewatering unit is a complete sludge treatment line built into a transportable structure. Faure Équipements, the French manufacturer of filter presses, has developed a range of mobile units that can be delivered to site, connected and put into operation with limited civil works. According to the manufacturer, these units are used cyclically by a range of service providers, moving from one site to the next as needs arise.

Depending on the quantity of dry solids to be treated, Faure Équipements builds its mobile units on standard semi-trailers or low-loader trailers, inside maritime shipping containers, or directly on steel skids for longer-term installations.

Typical Applications

  • Emergency dewatering when a fixed installation is out of service or overloaded.
  • Temporary capacity during the construction, extension or refurbishment of a treatment plant.
  • Lagoon and basin clean-outs, where accumulated sludge must be reduced in volume before disposal.
  • Pilot trials to measure the achievable cake dryness on a specific sludge before specifying a permanent installation.
  • Municipal and industrial sludge — both organic and mineral sludges can be treated, with performance varying according to sludge type.

Technical Configuration

The mobile units have been designed to integrate any type of filter press — recessed-chamber or mixed-pack — in a range of sizes, together with the sludge conditioning equipment and cake conveying systems. Based on the manufacturer's documentation:

  • Cake volume: from 250 to 6,000 litres of cake per cycle, depending on unit size.
  • Dry solids per press cycle: from 100 to 4,500 kg, for press cycles of 1 to 2 hours depending on whether the sludge is organic or mineral.
  • Cake dryness: from 30% to 80% depending on the sludge treated, in line with applicable environmental standards.
  • Integrated equipment: transfer and filter-press feed pumps; preparation and injection of conditioning reagents (ferric chloride, polymer, lime, etc.); and cake discharge systems, including screw conveyors.

Faure Équipements designs, builds, installs and commissions these mobile units.

Advantages Over Fixed Installations

Filter presses are known for producing a high cake dryness compared with many other dewatering technologies, and the mobile format retains that advantage. The manufacturer highlights several further benefits:

  • High dryness, from 30% to 80% depending on the sludge.
  • Robust, adaptable and reliable equipment.
  • A highly productive and fully autonomous unit.
  • Simplified set-up, with rapid opening and closing of the unit.
  • A particularly attractive cost for container-based solutions.

For the plant owner, the main advantage is often financial and organisational: capacity can be mobilised when needed without committing to a permanent building, and the same unit can serve several sites over its lifetime. A mobile unit is not a substitute for a well-designed permanent installation where sludge production is continuous and stable — but it fills the gaps that permanent assets cannot.

Deployment in the MENA Region

Several characteristics of the regional market make mobile dewatering particularly relevant:

  • Rapid infrastructure growth. New treatment plants and extensions are frequently commissioned in phases. Temporary dewatering capacity can bridge the gap between phases.
  • Remote and industrial sites. Oil and gas, mining and industrial facilities are often far from permanent sludge treatment infrastructure. A containerised unit can be shipped and installed where it is needed.
  • Logistics. Maritime containers are the native format of regional logistics, which simplifies transport through Gulf ports and onward by road.
  • Reducing disposal volumes. Higher cake dryness reduces the volume and weight of sludge to transport and dispose of, which matters wherever disposal routes are long or costly.

Soditech supports contractors, operators and service companies in the region in assessing whether a mobile filter-press unit fits their need, and in defining the appropriate configuration with the manufacturer.

Source: Faure Équipements, "Filtres-presses mobiles" product brochure. Figures quoted are those published by the manufacturer and depend on the sludge treated.

More about Faure Équipements →   Discuss your project →

Résumé en français — l'article complet est disponible en anglais (bouton EN).

Travaux de réhabilitation, curage de lagunes, défaillance d'une installation ou essais pilotes : les besoins temporaires de déshydratation sont fréquents. Les filtres-presses mobiles conçus par Faure Équipements répondent précisément à ces situations.

Le principe

Selon la quantité de matières sèches à traiter, Faure Équipements conçoit des unités mobiles sur semi-remorques classiques ou porte-chars, dans des containers maritimes ou directement sur châssis acier. Elles intègrent tout type de filtres-presses — chambrés ou mixed-pack — ainsi que les pompes de transfert et d'alimentation, la préparation et l'injection du conditionnement (FeCl3, polymère, chaux…) et l'évacuation des gâteaux.

Les performances annoncées

De 250 à 6 000 litres de gâteaux par cycle, soit de 100 à 4 500 kg de matières sèches par pressée de 1 à 2 heures selon la boue, pour une siccité de 30 à 80 %. Le fabricant met en avant un matériel robuste, autonome, rapide à mettre en œuvre et un coût particulièrement intéressant en version container.

Pour la région MENA

Croissance rapide des infrastructures, sites industriels isolés, logistique par containers maritimes et réduction des volumes à évacuer : autant de raisons de considérer une unité mobile. Soditech accompagne les EPC, exploitants et prestataires dans le choix de la configuration adaptée.

En savoir plus sur Faure Équipements →   Parler de votre projet →